瓦斯發電機組調速系統具備同類產品不具備的功能，能被廣泛應用主要是因為它系統性能好且明顯，主要優勢是怎樣的呢？

　　The speed regulation system of gas generator set has the functions that similar products do not have. It can be widely used mainly because its system performance is good and obvious. What are the main advantages?

　　電動機結構簡單、成本低、可用于高速運轉。其突出的優點是轉子上沒有任何形式的繞組，因此不會有鼠籠感應電機制造過程中鑄造不良和使用過程中的斷條等問題。其轉子機械強度高，可以用于高速運轉。

　　The motor has simple structure, low cost and can be used for high-speed operation. Its outstanding advantage is that there is no winding in any form on the rotor, so there will not be bad casting in the manufacturing process of the squirrel cage induction motor and broken bars in the process of use. Its rotor has high mechanical strength and can be used for high-speed operation.

　　從電動機的電磁結構上看，各項繞組和磁路相互獨立，各自在一定軸角范圍內產生電磁轉矩。而不像在一般電動機中在各相繞組和磁路共同作用下產生一個旋轉磁場，電動機才能正常運轉。

　　From the electromagnetic structure of the motor, each winding and magnetic circuit are independent of each other, and each produces electromagnetic torque within a certain range of shaft Angle. Unlike in the general motor in each phase winding and magnetic circuit under the joint action of a rotating magnetic field, the motor can operate normally.

　　從控制結構上看，各相電路各自給一相繞組供電，一般也是相互獨立工作。由此可知，當電動機一相繞組或控制器一相電路發生故障時，只需停止該相工作，電動機除總輸出功率能力有所減小外，并無其他妨礙。

　　From the point of view of the control structure, each phase circuit to each phase winding power supply, generally also work independently of each other. It can be seen that when the motor's one-phase winding or the controller's one-phase circuit fails, only stopping the work of the phase will reduce the total output power capacity of the motor, and there is no other obstruction.

　　控制瓦斯發電機組的主要運行參數和常用方法至少有四種：相導通角、相關斷角、相電流幅值、相繞組電壓。可控參數多，意味著控制靈活方便。

　　There are at least four main operating parameters and common methods for controlling gas generator sets: phase conduction Angle, correlation disconnection Angle, phase current amplitude and phase winding voltage. Controllable parameters, means flexible and convenient control.

　　可以根據對電動機的運行要求和電動機的情況，采取不同控制方法和參數值，即可使之運行于好狀態，還可使之實現各種不同的功能的特定曲線。如使電動機具有完全相同的四象限運行能力，并具有高起動轉矩和串勵電動機的負載能力曲線。

　　According to the operation requirements of the motor and the situation of the motor, different control methods and parameter values can be adopted to make the motor run in a good state, but also can make the motor realize different functions of the specific curve. For example, the motor has exactly the same four-quadrant operation capacity, and has a high starting torque and series excitation motor load capacity curve.

　　瓦斯發電機組調速系統可以通過自身的調解，滿足各種要求，當然使用期間也要多注意相關事項的發展才是，更多內容就來網站www.hdlelisa.com咨詢。

　　The gas generator set speed control system can meet various requirements through its own mediation. Of course, more attention should be paid to the development of relevant matters during the use of the gas generator set. More content is to consult the website www.hdlelisa.com.