Straw power generation is one of the main ways to optimize the utilization of straw, and it is a kind of biomass gas power generation. Straw is a good clean and renewable energy. The calorific value of every two tons of straw is equivalent to one ton of standard coal, and its average sulfur content is only 3.8%, while the average sulfur content of coal is up to 1%. In the process of biomass recycling, the emission of CO2 is closely related to biomass regeneration It is of great significance to alleviate and ultimately solve the problem of greenhouse effect.

秸稈發電一般分為燃料準備階段和輸送階段，進入燃料倉之前的秸稈處理生產線為燃料準備階段，從燃料倉到爐前這個階段為燃料輸送階段。

Straw power generation is generally divided into fuel preparation stage and conveying stage. The straw treatment production line before entering the fuel bunker is the fuel preparation stage, and the stage from the fuel bunker to the furnace is the fuel conveying stage.

1、燃料準備階段的工藝流程

1. Process flow in fuel preparation stage

秸稈通過皮帶輸送線(上料)->切碎機(粗加工)->錘磨機(細加工)->旋風分離器(分離切碎的秸稈和粉塵，秸稈進入料倉)->布袋除塵器(粉塵回收，氣體排放)

Straw through the belt conveyor line (feeding) - > chopper (rough processing) - > hammer mill (fine processing) - > cyclone separator (separation of chopped straw and dust, straw into the bin) - > bag filter (dust recovery, gas emission)

2、燃料輸送階段的工藝流程

2. Process flow of fuel delivery stage

秸稈通過位于燃料倉下部平面布置的由變頻電機驅動的橫向排放螺旋輸送機驅動進而送入一個縱向螺旋輸送機。從縱向螺旋輸送機出來的燃料進入出料口的螺旋氣閥。通過一次風機將從位于燃料倉的下部出料口的燃料以氣動的形式分別送入燃燒器進行燃燒。

The straw is driven by a transverse discharge screw conveyor driven by a frequency conversion motor, which is arranged in the lower plane of the fuel bunker, and then sent to a longitudinal screw conveyor. The fuel from the longitudinal screw conveyor enters the screw valve at the discharge port. Through the primary air fan, the fuel from the lower outlet of the fuel bunker is pneumatically sent to the burner for combustion.